Piping Specifications for Phase II & Final System (Greg's document - end of 2000)
Leak check and cleaning procedure adopted for ATLAS phase II
| Layout test in Bd. 175
|
Phase II Engineering parameters:
Piping Specifications for Phase II & Final System (Greg's document - end of 2000) Leak check and cleaning procedure adopted for ATLAS phase II |
Compressor unit - General description and Operation
Haug reciprocating compressor QTOGX 125 LM - 4 cylinders:
Layout in Bd.175
First tests with compressor
Test Circuit
Typical Run
Corresponding LnP-H Diagram
Mass flow and power
Distribution racks:
|
Layout of pressure regulators and back pressure regulators |
The racks in the workshop |
|
Schema of the distribution |
Diagram of the pneumatic control |
Small Unit for Heat Exchanger and Heater Tests
|
|
|
Back to ST/CV Cooling of Detectors Home Page
CERN/P.BONNEAU/06/12/2002
