Evaporative cooling systems

ATLAS TRACKER PIXEL AND SCT - COOLING OF THE ELECTRONICS
Phase II - Extentive Tests with Haug Compressor 4 cylinders
Technical Data Sheet


HAUG GAS compressor

Type QTOGX 125 LM

for oilless compression of dry and filtered Octafluoropropane (C3F8)

4 cylinders, one-stage, air cooled, gastight

Compressor

Number of stages 1 stage
Stage 1st stage
Number of cylinders 4 cylinders
Cylinder diameter 125mm
Piston stroke 50mm
Synchronous nominal rotational speed (with frequency converter supplied by CERN) 1450rpm
Medium Octafluoropropane, dry and filtered
Suction temperature [°C]

Suction pressure P1 [bar.a]

Discharge pressure P2 [bar.a]

Power absorbed [kW]

Free gas delivery at 1013 mbar, 20°C [m3/h]

20

1.0

10.0

12.5

80

Leakage rate gastight, less than 0.001 mbar.l/s
Noise level approx. 82 dB(A) acc. to CAGI-Pneurop
Cooling air-cooled
Discharge temperature approx. 20°C above ambient temp.
Limits of compressor min. max.
Casing pressure max. [bar.a]

Suction pressure P1 [bar.a]

Discharge pressure P2 max [bar.a]

Suction temperature range [°C]

Ambient temperature range [°C]

 

1.0

 

20

3

11

1.0

10

35

35

Power supply
Voltage 400V±10%
Frequency 50 Hz
Phases 3P+E
Motor
Power 15.0 kW
Protection IP54
Insulation class F
Rated speed 1450rpm
Start Frequency-converter (supplied by CERN)
Solenoid valves
Control voltage 24 VAC
Filtration required at compressor inlet
Filtration rate based on 0.01 micron particles 99.9999%

Back to ST/CV Cooling of Detectors Home Page                                                                                            CERN/P.BONNEAU/02/07/2001